Specifications

ptg
188
Introducing Effects
5. Select both the V1 and A1 tracks.
6. Press the backslash (\) key to open the Quick Transition dialog box.
7. Design a dissolve (which will emulate a fade because it’s positioned at
the beginning of the sequence). It should use the following criteria:
 Set Add to Dissolve.
 Set Position to Starting at Cut.
 Set Duration to 45 frames.
8. Click Add.
9. Place the position indicator at the end of the sequence, and make sure
that V1 and A1 are still selected.
10. Open the Quick Transition dialog box, and design a dissolve using the
following criteria:
 Set Add to Dissolve.
 Set Position to Ending at Cut.
 Set Duration to 45 frames.
11. Play the beginning and end of the sequence. You should have a nice
fade-up with the dancing and music and a nice fade-down with the
bows and applause. If you’d like to tweak anything regarding dissolve
duration or position, you may do so.
Adding Transition Effects from the Effect Palette
In addition to adding transitions via the Quick Transition dialog box, you
can also add transitions via the Effect Palette.
Download from www.wowebook.com