Specifications

ptg
136
Basic Audio Editing
Practice Your Skills
1. Open the _Sequences Chap 5 bin, and open the “Transformation
Scene rough cut Audio Part 1” sequence.
If you completed all the trimming exercises in Chapter 4, this sequence
should be in the same state as the sequence you edited.
2. Open the Audio tool and Audio Mixer, if necessary.
Unfortunately, the interview audio that you just fixed (if you completed
the previous exercise) will not be fixed in this sequence because the
sequence was edited before you changed the source clip. Therefore,
you need to fix the level and pan issues for the interview segments on
A1 and A2.
3. Park your position indicator on the first Tony interview 1 segment.
Mark an IN.
4. Park your position indicator on the third Tony interview 1 segment.
Mark an OUT.
5. Select only A1 and A2. (Deselect all other tracks.)
6. Solo both A1 and A2 in the Audio Mixer.
7. Adjust the level and pan for one of the Tony interview 1 segments
using the techniques you applied in the previous exercise.
8. When you are happy with the audio level and pan results, navigate
to the Fast menu in the Audio Mixer, and select Set Level On Track –
In/Out.
9. From the Audio Mixer Fast menu, select Set Pan on Track – In/Out.
NOTE Because you’ve
set broader IN and OUT
points in this exercise,
you should not click Play
Loop for your audio dur-
ing this adjustment.
Download from www.wowebook.com