Specifications

ptg
119
Slipping and Sliding Segments
The first picture is the outgoing frame before the selected shot; the last
picture is the incoming frame after the selected shot. The middle two
pictures are the head and tail of the shot you are slipping.
2. In the Timeline, click one of the selected heads or tails (it doesn’t mat-
ter which you click). With the tail of the Trim mode pointer directed
toward the center of the segment you are sliding, drag the selected
material to the left or right.
Notice that the first and last pictures remain static as you drag
because you are not changing the position of the shot in the sequence.
The middle two pictures change because you are changing the content
of the shot itself. Dragging right reveals later material. Dragging left
reveals earlier material.
3. Release the mouse button when you are satisfied with the change.
Using Slide Mode to Change the Shot Position
When you slide a shot, the position of the shot changes, but its duration
and content do not. Essentially, the sliding shot moves between the two
adjacent shots, and the handles on each side roll in and roll out to accom-
modate the move.
Slide Left Slide Right
Download from www.wowebook.com