Specifications

ptg
115
Additional Methods for Adding and Removing Frames
Additional Methods for Adding
and Removing Frames
In addition to using the Trim buttons and dragging trim rollers, you can add
and remove frames while trimming in several other ways.
Yo u c an u se an y o f t he f ol low in g m et h od s to tri m:
To trim using the numeric keypad, do one of the following:

Type a p lus (+) s ign and the number of frames (from 1–99) that you
want to move the transition forward, and then press Enter.

Type a m inus (–) sign and the n umber of f rames (from 1–99) you w ant
to move the edit backward, and then press Enter.

Type a n umber large r tha n 99 to enter a tim ecode (for ex am ple, to
enter one second and two frames, type 102). Or with Caps Lock
disabled, type f after a large number to enter it as a frame count (for
example, to enter 200 frames, type 200 f, and press Enter).
Yo u c an u se th e J -K- L n avi ga tio n b ut to n s o n t he k ey bo a rd t o t ri m wh il e you
are in Trim mode.
To Trim using the J-K-L keys:

Press J to trim earlier in real time.

Press L to trim later in real time.

Press J and K to trim earlier in slow motion (at either 6 fps or 8 fps,
depending on the project type).

Press L and K to trim later in slow motion (at either 6 fps or 8 fps,
depending on the project type).

Press J up to five times to trim earlier in fast motion (at 1x, 2x, 3x, 5x,
and 8x speeds).

Press L up to five times to trim later in fast motion (at 1x, 2x, 3x, 5x,
and 8x speeds).
NOTE The plus and
minus keys refer only to
the direction of the trim.
They do not necessarily
indicate that frames will
be added or removed.
Think plus (+) to move a
transition later, and think
minus (–) to move a tran-
sition earlier.
Download from www.wowebook.com