Specifications

ptg
107
Performing Trims
Performing a Dual-Roller Trim
When you enter Trim mode, you automatically are set up for a dual-roller trim,
indicated by the presence of trim rollers on each side of the transition point.
In addition, both trim boxes (between the A-side Trim monitor and B-side
Trim monitor) are highlighted in pink.
And finally, when you hover your pointer over the transition, it turns into a
dual-roller trim icon.
To perform a dual-roller trim using the Trim buttons:
1. Before performing the trim, it’s often useful to play the transition sev-
eral times to analyze exactly how it looks and what you think should be
done to change it. To repeatedly play the currently selected transition,
click the Play Loop button below the B-side monitor, or press 5 while
in Trim mode. To stop looping the playback, click the Play Loop button
again or press 5 or the space bar.
2. After you’ve decided how you’d like to perform the trim, use the Trim
buttons (below the A-side Trim monitor) to add frames to one side of
the selected transition, and remove them from the other.
Trim left 1 0 frames
Trim left 1 frame Trim right 1 frame
Trim right 10 frames
The Trim buttons correspond to the M, comma, period, and backslash
keys on the keyboard.
Download from www.wowebook.com