Specifications

ptg
96
Timeline Editing
5. The “Magician and assistant” clip will load in the Source monitor, and
Media Composer will place an IN point at the exact frame where your
position indicator is located.
Media Composer matches the video frame in the Source monitor to the
location of your position indicator in the Timeline. You now have a clip
loaded in which you can use the sync sound to accompany the video
B-roll that is already edited in the sequence.
6. Deselect V1 on both the source and record track selectors.
7. If necessary, patch A1 to A3 by dragging an arrow from A1 on the
source side to A3 on the record side.
8. If necessary, patch A2 to A4 by dragging an arrow from A2 on the
source side to A4 on the record side.
9. With A3 and A4 selected, mark an IN at the beginning of the
sequence.
10. Mark an OUT at the last frame of the filler (right before Dr. Shannon’s
interview segment).
This will be the location where you will overwrite the “Magician and
assistant” music track.
Because the “Magician and assistant” clip is already loaded in the
Source monitor and marked with an IN point, you’re ready to make a
three-point edit.
Download from www.wowebook.com