Specifications

ptg
90
Timeline Editing
Center Duration
The Center Duration box appears in the upper center of the Source/Record
monitor. This box will display the IN to OUT duration of clips on either the
source or record side, depending on which is active. Viewing the center
duration is a great way to quickly see the exact length of a sequence or to
verify that you have enough material to overwrite a gap in the sequence.
When no marks are present, the Center Duration box displays the time
remaining in the clip. With one mark present, the box displays the duration
between the mark and the blue position indicator.
Click the Center Duration value to toggle between the timecode and frame
count displays.
Using the Timecode Display
The timecode display—located above the Source and Record monitors—
shows data about the source of the frame that is currently displayed in the
monitor. You can customize the timecode display to show exactly the infor-
mation that you want to see about the source clip, the sequence, or the
source clips that make up your sequence.
To adjust the Source monitor timecode display:
1. Click the first (or second) row of the timecode display.
A nested menu with three panes appears.
Pane 1
Pane 2
Pane 3
2. Select the type of timecode information you want to display.
 If you want to display the timecode of the source clip (the timecode
at the position indicator location), select Source from Pane 1. Then
select the video or audio track you want to display, and select TC1.
NOTE Center Duration
is enabled by default.
If you don’t see it, you
can enable it in the
Composer settings on
the Window tab.
Download from www.wowebook.com