Instruction manual

14
OPERATION
MULTIPLE PATTERN SELECTION
Reset the operation panel to initial mode:

→
Press the WIPE button

to place the unit in WIPE mode.

→
Select a wipe pattern e.g. straight wipe by pressing button

.

→
Press the MULTI button

repeatedly to have the desired multiplication effect.
(4) options are available: x1, x2, x4 and x8.

→
Press one of the A-bus selection buttons to select a source.

→
Press one of the B-bus selection buttons to select a source.

→
Operate the video slide

to control the wipe pattern.
*The same procedure applies to the other wipe patterns.
ONE-WAY WIPE

→
Press the WIPE button

to place the unit in WIPE mode.

→
Select a wipe pattern e.g. straight wipe by pressing button

.

→
Press the ONE-WAY 3 button.

→
Press one of the A-bus selection buttons to select a source.

→
Press one of the B-bus selection buttons to select a source.

→
Operate the video slide

to control the wipe pattern.
REVERSE WIPE

→
Press the WIPE button

to place the unit in WIPE mode.

→
Select a wipe pattern e.g. straight wipe by pressing button

.

→
Press the REVERSE

button.

→
Press one of the A-bus selection buttons to select a source.

→
Press one of the B-bus selection buttons to select a source.

→
Operate the video slide

to control the wipe pattern.
* The wipe pattern moves in the normal direction the Video
Slider control

is operated.
* The wipe pattern moves in the normal
direction the Video Slider control

is
operated.