Instruction manual

8
OPERATION CONTROLS AND FUNCTIONS
ADJUST

Adjust Button: When LED switched off, the SDP review output side will show AB-bus / output source and output format. When LED
illuminate, the user can press

/

/

and

buttons to adjust the values.

DEMO Button: When LED illuminate, the auto DEMO will switch to ON and the system will auto sequence Demo 96 wipe patterns,
press the

TIME button to adjust the auto sequence.

SCAN Button: Press and hold SCAN button for 3 seconds, the system will enter into SCAN function and will SCAN the input ports
from 1 to 6 and record each port’s format to the system.
VIDEO/AUDIO MIXER

AUDIO FOLLOW: When turn on the Audio Follow A/B bus’s sound indicator will follow the VIDEO slider movement. When turn off the
Audio Follow, the audio indicator will become independent to adjust from

and

.

AUTO/WIPE: AUTO FADE/WIPE can be performed with START

button when the button

is set to ON.

START Button: Automatic MIX and WIPE operation can be performed by pressing the START button. Transition time can be adjusted
via TIME

. When transition time lapsed, the LED goes off.

VIDEO Slide: Wipe, PIP and Key effects can be controlled by this Video slide which moves A/B bus outputs horizontally or vertically.