Instruction manual

FRONT & back PANEL

Front Panel Operation

ANI-MOD1616/ANI-MOD3232/ANI-MOD6464: The switcher models ANI-MOD1616, ANI-MOD3232, and ANI-MOD6464 share the same

function buttons, the only difference is the chassis height and number of I/O’s. The front panel of ANI-MOD1616/3232/6464 is shown as below.

1. IR: IR sensor, receive IR signal sent from IR remote

2. POWER INDICATOR: Illuminate red once powered on

3. LCD SCREEN: Display real-time operation status

4. INPUTS: Buttons for input channels with green back-light indicating, ranges from 0~ 9, 32 selectable channels in total

5. OUTPUTS: Buttons for output channels with green back-light indicating, ranges from 0 ~ 9, 32 selectable channels in total

6. MENU AV: Transfer video and audio signal synchronously

,: division button, to divide the output channels when switching to more than one channel

ENTER: Conrm switching operation. Operation will not be executed by the matrix without conrmation

ALL: To transfer an input channel to all output channels

THROUGH: To transfer the signals directly to the corresponding output channels

UNDO: Undo button, to resume to the status before the command just performed

← : Backspace - to backspace the latest press

BACK Panel Operation

1. INPUTS: Input signal card slots

2. OUTPUTS: Output signal card slots

3. POWER SWITCH: Switch between AC110V and AC230V to access different power

4. POWER PORTS: Connect with household alternating current power, including one redundant power

5. RS-232: Serial control port, connect with RS-232 port of control device

6. TCP/IP (Optional): Used for TCP/IP control port

A NEUVIDEO

q w e