Instruction manual

ani-mod88

Front Panel Operation

ANI-MOD88: The front panel of ANI-MOD88 is shown as below.

1. IR: IR sensor, receive IR signal sent from IR remote

2. POWER INDICATOR: Illuminate red once powered on

3. LCD SCREEN: Display real-time operation status

4. INPUTS: Buttons for input channels with green back-light indicating, ranges from 1~ 8, (8) selectable channels in total

5. OUTPUTS: Buttons for output channels with green back-light indicating, ranges from 1 ~ 8, (8) selectable channels in total

6. MENU AV: Transfer video and audio signal synchronously

VIDEO: Transfer video signal only

AUDIO: Transfer video signal only

ALL: Select all input/output channel

THROUGH: To transfer the signals directly to the corresponding output channels

UNDO: Undo button, to resume to the status before the command just performed

← : Backspace - to backspace the latest press

BACK Panel Operation

1. INPUTS: Audio input slot

2. OUTPUTS: Audio output slot

3. INPUTS: Input signal card slots, (2) in total

4. OUTPUTS: Output signal card slots, (2) in total

5. POWER PORTS: Connect with household alternating current power

6. RS-232: Serial control port, connect with RS-232 port of control device

7. GND CONNECTOR: Used for system grounding

8. TCP/IP (Optional): Used for TCP/IP control port

Note: There are only (2) input and (2) output slots for ANI-MOD88, which enables only (2) input cards and (2) output cards to be

installed. The input/output cards can be changed based on your requests and supports hot plug and play.

A NEUVIDEO

q w

e r