Instruction manual

21
RS-232 CommandS
ANI-IN-VA
Command Types Command Codes Functions
USER/I/[x]:0622%; Set the signal of input channel [x] to VGA.
USER/I/[x]:0623%; Set the signal of input channel [x] to YCBCR.
USER/I/[x]:0624%; Set the signal of input channel [x] to SVIDEO.
USER/I/[x]:0625%; Set the signal of input channel [x] to CVIDEO.
USER/I/[x]:0626%; Set the resolution of input [x] to 1024x768@60Hz.
USER/I/[x]:0627%; Set the resolution of input [x] to 1280X720@60Hz.
USER/I/[x]:0628%; Set the resolution of input [x] to 1280X800@60Hz.
USER/I/[x]:0619%; Set the resolution of input [x] to 1360X768@60Hz.
USER/I/[x]:0621%; Set the resolution of input [x] to 1600X1200@60Hz.
USER/I/[x]:0629%; Set the resolution of input [x] to 1920X1080@60Hz.
USER/I/[x]:0620%; Set the resolution of input [x] to 1920X1200@60Hz.
USER/I/[x]:0617%; Restore input [x] to factory default.
USER/I/[x]:0606%; Auto-adjust VGA signal
USER/I/[x]:0698%; Update software
ANI-IN-HDBT-4K / ANI-IN-HDMI-4K
Command Types Command Codes Functions
AUDIO[X]I[Z]. X is the input port.
Z is 0 or 1 (0 means select HDMI embedded audio, 1 means select external audio)
For example, when useing ANI-IN-HDMI-4K input card plugged in to slot number (2).
Sending the command “AUDIO6I1.” to the matrix will select Input Channel 6, External
audio.
When using ANI-IN-HDBT-4K input card, plugged in to the rst slot. Sending command
“AUDIO3I0.” to the matrix will select Input Channel 3, HDMI embedded audio.
A NEUVIDEO
Commands for Signal Cards
Commands for Signal Cards