Instruction manual

20
RS-232 CommandS
ANI-IN-DVS
Command Types Command Codes Functions
USER/I/[x]:02xx%; Set the brightness of input [x] to xx, xx=00~99
USER/I/[x]:03xx%; Set the contrast of input [x] to xx, xx=00~99
USER/I/[x]:04xx%; Set the saturation of input [x] to xx, xx=00~99
USER/I/[x]:05xx%; Set the sharpness of input [x] to xx, xx=00~99
USER/I/[x]:0606%; (For 4I-DS/ VA) Auto-adjust VGA input signal
USER/I/[x]:0607%; Set picture’s color temperature
USER/I/[x]:0608%; Congure image scale
USER/I/[x]:0614%; Congure picture mode
USER/I/[x]:0617%; Restore input [x] to factory default.
USER/I/[x]:0619%; Set the resolution of input [x] to 1360x768, HD
USER/I/[x]:0626%; Set the resolution of input [x] to 1024x768, XGA
USER/I/[x]:0627%; Set the resolution of input [x] to 1280x720, 720P
USER/I/[x]:0628%; Set the resolution of input [x] to 1280x800, WXGA
USER/I/[x]:0629%; Set the resolution of input [x] to 1920x1080, 1080P
USER/I/[x]:0620%; Set the resolution of input [x] to 1920x1200, WUXGA
USER/I/[x]:0621%; Set the resolution of input [x] to 1600x1200, UXGA
USER/I/[x]:0698%; Software update
USER/I/[x]:0686%; Set the output signal of input [x] to HDMI
USER/I/[x]:0687%; Set the output signal of input [x] to DVI
ANI-OUT-DVS
Command Types Command Codes Functions
USER/O/[x]:0201%; Set the input source of output [x] to YPbPr
USER/O/[x]:0202%; Set the input source of output [x] to VGA
USER/O/[x]:0203%; Set the input source of output [x] to C-VIDEO
USER/O/[x]:0804%; Set the resolution of output [x] to 1280x720P @60Hz
USER/O/[x]:0813%; Set the resolution of output [x] to 1280x1080P @60Hz
USER/O/[x]:0824%; Set the resolution of output [x] to 1024x768 @60Hz
USER/O/[x]:0826%; Set the resolution of output [x] to 1280x1024 @60Hz
USER/O/[x]:0837%; Set the resolution of output [x] to 1920x1200 @60Hz
USER/O/[x]:0106%; Switch on the HDCP compliance of output [x]
USER/O/[x]:0107%; Switch off the HDCP compliance of output [x]
GetResolution[x]. Capture output resolution of output [x]
GetVGAPortMode[x]. Inquire the output status of VGA port [x]
USER/O/[x]:0617%; Restore output [x] to factory default.
A NEUVIDEO
Commands for Signal Cards
Commands for Signal Cards