Instruction manual

CHANGEABLE CARDS

4K2K FIBER Card

ANI-IN-4K2KF & ANI-OUT-4K2KF

Input Output

Input (4) Fiber Optical Output (4) Fiber Optical

Input Connector SPF Fiber Optical Connector Output Connector SPF Fiber Optical Connector

Fiber Type Multi-mode, Single mode Fiber Type Multi-mode, Single mode

General

Data Rate 10.2 Gbps Color Depth 8bit, 10bit, 12bit, 16bit

Work Temperature 0°C~55°C Reference Humility 10%~90%

Optical Fiber Mode

Connector LC connector Resolution Up to 4K2K

Transmission Distance 1Km (Single mode transmission, using Single Mode Optical Module and OM3 Single Mode Fiber Cable)

300M (Multi-mode transmission, using Single/ Multi mode Optical Module and OM3 Multi-Mode Fiber Cable)

Data Rate 10.2Gbit/s

• Support hot-plug; High bandwidth: 10.2Gbps

• Compliant with HDMI 1.4

• Capable to transmit 4K2K & 1080p 3D (max) signals

• Supports multi-mode transmission up to 300m and single mode transmission up to 1Km

ANI-IN-4K2KF: Is an input card which accepts a maximum of input (4) separate signals. Corresponding indicator illuminates green when

there is an input signal. Input signals can come from ANI-OUT-4K2KF, or from other kinds of output cards in the series.

ANI-OUT-4K2KF: Is an output card which provides a maximum of (4) separate output signals. Input signals can come from ANI-IN-

4K2KF, or from other kinds of input cards in the series. Corresponding indicator illuminates green when there is output signal.

Note: Use the ANI-IN-4K2KF & ANI-OUT-4K2KF with an optical ber transmitter/receiver.

A NEUVIDEO