Instruction manual

10
CHANGEABLE CARDS
SDI Signal Card
ANI-IN-SDI & ANI-OUT-SDI
Input Output
Input (4) SDI Output (4) SDI
Input Connector Female BNC Output Connector Female BNC
Input Level 0.8Vp-p ± 10% Output Level 0.8Vp-p ± 10%
Input Impedance 75Ω Output Impedance 75Ω
General
Gain Unity Transmission Distance 300M (Max)
Video Standard SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120
Audio Bits per Sample 18 bits per channel, 2 channels (L, R)
Input Return Loss < -14dB@1MHz ~ 1.5GHz Maximum Data Rate 2.97 Gbps
Data Rate Lock Auto Data Type 8bit, 10bit
• Compatible with various different SDI signal formats, including SD/HD/3G-SDI (adaptive)
• Every port has looping output for local monitoring
ANI-IN-SDI: Is an input card which accepts a maximum of (4) separate SDI input signals. Input signal can be passed to output device
through ANI-OUT-SDI, or passed through other output cards in the series. This card is unique when compared to the other input cards in
that it provides a “through” connection for daisy-chainging video devices. Each input signal can be immediately sent back out (“looping”
it), without switching capability, to go to individual monitors.
ANI-OUT-SDI: Is an output card which provides a maximum of (4) separate SDI output signals. Input signals can come from an ANI-IN-SDI,
or from other kinds of input cards in the series.
The BNC connector is shown as the gure below.
A NEUVIDEO