Instruction manual
8
CHANGEABLE CARDS
VGA Signal Card
ANI-IN-VGA/ANI-IN-VA & ANI-OUT-VGA
Video Input Video Output
Input (4) VGA Output (4) VGA
Input Connector Female 15 pin HD Output Connector Female 15 pin HD
Input Level 0.5 ~ 2.0Vp-p Output Level 0.5 ~ 2.0Vp-p
Input Impedance 75Ω Output Impedance 75Ω
Audio Input Audio Output
Input (4) STEREO AUDIO Output (4) STEREO AUDIO
Input Connector 3P Captive connector Output Connector 3.5mm Stereo audio connector
CMRR >90dB @20Hz ~ 20KHz CMRR >90dB @20Hz ~ 20KHz
Input Impedance >10KΩ Output Impedance >10KΩ
General
Gain 0 dB Bandwidth 350MHz (-3dB), fully load
Video Signal VGA-UXGA, RGBHV, RGBS, RGsB, RsGsBs, component video, S-video & composite video
Crosstalk <-50dB@5MHz Switching Speed 200ns (Max)
EDID and DDC Supports Extended Display Identication Data (EDID) and Display Data Channel (DDC) data using DVI
and HDMI standards. EDID and DDC signals are actively buffered
HDCP Compliant with HDCP using DVI and HDMI 1.4a standards
• Scales all inputs to 1080p
• Compatible with C-Video, YUV, YC (Factory preset function)
• Supports RGBHV, RGsB, RGBS, RsGsBs, YUV, YC and Composite video
ANI-IN-VGA: Is an input card which accepts a maximum of (4) separate VGA inputs and (4) stereo audio inputs. Input signal can pass to output
device through other output cards in the series. (Resolutions Supported: 1920x1080p; XGA (1024x768); 1280x720p; WXGA (1280x800).
ANI-OUT-VGA: Is an output card, which provides a maximum of (4) separate VGA output signals.
Pin layout of the VGA connectors (female):
PIN Signal Name PIN Signal Name
Pin 1 RED Pin 9 KEY/PWR
Pin 2 GREEN Pin 10 GND
Pin 3 BLUE Pin 11 ID0/RES
Pin 4 ID2/RES Pin 12 ID1/SDA
Pin 5 GND Pin 13 HSync
Pin 6 RED_RTN Pin 14 VSync
Pin 7 GREEN_RTN Pin 15 ID3/SCL
Pin 8 BLUE_RTN
A NEUVIDEO