Instruction manual

ManualsBrandsA-Neu Video ManualsBusiness equipmentANI-MOD Series

TABLE OF CONTENTS

CONTENTS

INTRODUCTION ...............................................................1

PACKAGE CONTENTS ..................................................... 1

FEATURES & SPECIFICATIONS ..................................... 2

SYSTEM REQUIREMENTS ............................................ 2

FRONT PANEL ................................................................ 3

REAR PANEL ................................................................... 4

OUTPUT MODES .......................................................... 5

REMOTE CONTROL ...................................................... 6

RS-232 & TELNET COMMANDS ...................................... 7

GUI INTERFACE .............................................................. 9

OSD MENU ................................................................... 10

TIMING ............................................................................. 12

WEB GUI ......................................................................... 13

CONNECTION DIAGRAM ............................................... 16

Dear Customer

Thank you for purchasing this product. For optimum performance

and safety, please read these instructions carefully before

connecting, operating or adjusting this product. Please keep this

manual for future reference.

INTRODUCTION

The ANI-QUAD is a high performance, high speed HDMI video

processing system that can be easily congured and controlled for

three different output modes (Matrix, Dual and Video Wall) for various

applications. Matrix mode routes the source signals to output displays

as a regular matrix does, Dual mode allows (2) sets of (2) selected

sources to be shown on designate output displays (2 displays as a

set) and Video Wall mode extends a selected source to all (4) output

displays at one time. Supports full range of video resolutions up to

WUXGA@60 (RB) or 1080p and different audio formats up to 7.1CH

LPCM at 192 kHz sampling rate based on input source capability. The

ANI-QUAD control can be done through IR using the included remote

control, Telnet (Ethernet), RS-232 or from the front panel buttons, the

included GUI software or built-in browser.

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging

and make sure the following items are contained in the shipping

carton:

• ANI-QUAD

• Remote Control

• Software CD Driver

• 12V/3A DC Power Adaptor

• Users Manual

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow

for sufcient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. We assume no responsibility for any

infringements of patents or other rights of third parties which may

result from its use.

We assume no responsibility for any inaccuracies that may be

contained in this document. We make no commitment to update or

to keep current the information contained in this document.

We reserve the right to make improvements to this document and/

or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise — without express written permission and consent

Version 1.6 MAR 2015

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may

be trademarks of the companies with which they are associated.