Manualshelf

User`s manual

ManualsBrandsA-Link ManualsComputer equipmentWNAP4G
41424344454647484950
USER’S MANUAL OF WNAP 3G MOBILE ROUTER Version: 1.4
40
Item Description
L2TP Allow user to make a tunnel with remote site directly to secure the
data transmission among the connection. User can use embedded
L2TP client supported by this router to make a VPN connection.
IP Address If you select the L2TP support on WAN interface, fill in the IP
address for it.
Subnet Mask If you select the L2TP support on WAN interface, fill in the subnet
mask for it.
Gateway If you select the Static L2TP support on WAN interface, fill in the
gateway for WAN interface out going data packets.
Server IP Address Enter the IP address of the L2TP Server.
User Name If you select the L2TP support on WAN interface, fill in the user
name and password to login the L2TP server.
Password f you select the L2TP support on WAN interface, fill in the user
name and password to login the L2TP server.
MTU Size Fill in the mtu size of MTU Size. The default value is 1460. Refer
to 4.23 What is Maximum Transmission Unit (MTU) Size?
Attain DNS Automatically Click to select getting DNS address for L2TP support. Please
select Set DNS Manually if the L2TP support is selected.
Set DNS Manually Click to select getting DNS address for L2TP support.
DNS 1 Fill in the IP address of Domain Name Server 1.
DNS 2 Fill in the IP address of Domain Name Server 2.
DNS 3 Fill in the IP address of Domain Name Server 3.
Clone MAC Address Fill in the MAC address that is the MAC address to be cloned.
Refer to 4.24 What is Clone MAC Address?
Enable uPNP Click the checkbox to enable uPNP function.
Refer to 4.22 What is Universal Plug and Play (uPNP)?
Enable IGMP Proxy Click the checkbox to enable IGMP Proxy.
Enable Ping Access on WAN Click the checkbox to enable WAN ICMP response.
Enable Web Server Access on WAN Click the checkbox to enable web configuration from WAN side.
Enable FTP Server Access on WAN Click the checkbox to enable FTP Server Access on WAN
Apply Changes Click the Apply Changes button to complete the new
configuration setting.
Reset Click the Reset button to abort change and recover the previous
configuration setting.