User Guide

USER’S MANUAL OF WLAN BROADBAND ROUTER Version: 1.0
2
1.3 Product Features
¾ Complies with IEEE 802.11b/g standard for 2.4GHz Wireless LAN.
¾ Supports bridging, routing, VPN, WISP functions between wireless and wired
Ethernet interfaces.
¾ Supports 64-bit and 128-bit WEP, WPA, WPA2 encryption/decryption function to
protect the wireless data transmission.
¾ Supports IEEE 802.1x Authentication.
¾ Support Wi-Fi Protected Access Authentication with Radius and Pre-Shared Key
mode.
¾ Supports Inter-Access Point Protocol (IAPP).
¾ Supports Wireless Distribution System (WDS).
¾ Supports IEEE 802.3x full duplex flow control on 10/100M Ethernet interface.
¾ Supports DHCP server to provide clients auto IP addresses assignment.
¾ Supports DHCP client for Ethernet WAN interface auto IP address assignment.
¾ Supports static and dynamic IP routing.
¾ Supports PPPoE on Ethernet WAN interface.
¾ Supports clone MAC address function.
¾ Supports firewall security with port filtering, IP filtering, MAC filtering, port
forwarding, trigger port and DMZ hosting functions.
¾ Supports WEB based management and configuration.
¾ Supports PPTP Client on Ethernet WAN interface.
¾ Supports UPnP for automatic Internet access.
¾ Supports Dynamic DNS service.
¾ Supports NTP client service.
¾ Supports Log table and remote Log service.
¾ Support Setup Wizard mode.
¾ Supports Virtual Private Network (VPN) connection.
¾ Supports IPSEC tunnel encryption(3DES/AES128) and authentication(MD5/SHA1)
¾ Supports WISP (Wireless ISP).