User Guide

4. Set modem to pure bridge state
nt to use modem own NAT/Firewall feature (ports 1, 2 and 3 and WLAN)) (This step is for those who do not wa
8
1. Open Internet browser and type address http://10.0.0.2
ord and press Login. 2. Type password passw
3. Choose SETUP WIZARD and in first step ”1. Getting Start”
press Next button.
In second step ”2. Channel/SSID/Security” you can setup
wireless network settings and security. Check detail
instructions from step 8 “Setting up wireless network and
security”. Press Next button.
VPI/VCI = < Add your ISP VPI/VCI values >
Encapsulation = LLC
ress Next button.
d
. Press Next to save all these changes.
When all settings has been saved to modem, renew your computer
IP address or reboot your computer when new IP address is found
during boot up.
An example how to renew IP address:
ce
as administrator. (click right mouse button)
ig /renew and press Enter.
4.
5. Add your ISP setting in third step”3. Parameters Settings”.
Country = Others
Internet Service Provider = ISP use Bridging
IPTV = No
P
6. In fourth step”4. Confirm” you can check and confirm modifie
values before saving
7.
1. Open Start menu.
2. Open Command Prompt from All programs -> Ac
3. In Microsoft Vista you have to run Command Prompt
4. Type command ipconfig /release and press Enter.
5.
Type command ipconf
ssories.