User Guide

3. Specify your ISP VPI/VCI values
his step is for those who specify ISP VPI/VCI values manually)
!! Follow these instructions only if your ISP does not use below VPI/VCI values:
0/33. 8/35, 0/32, 0/50, 0/40
Open Internet browser and type address http://10.0.0.2
(T
Note
0/100,
1.
Type password password and press Login.
Choose SETUP WIZARD and press Next button in first step
”1. Getting Start”.
In second step ”2. Channel/SSID/Security” you can setup
wireless network settings and security. Check detail instructions
from step 8 “Setting up wireless network and security”. Press
Next button.
Internet Service Provider = ISP use 1483Bridging-DHCP
ss>
VPI/VCI = <Add your ISP VPI/VCI values>
Encapsulation = LLC
Press Next button.
. In fourth step”4. Confirm” you can check and confirm modified
2.
3.
4.
5. Add your ISP setting in third step”3. Parameters Settings”.
Country = Others
IPTV = No Å you can choose Yes if you have IPTV
DNS Server = <Add your ISP DNS addre
6
values before saving. Press Next to save all these changes.
7