User Guide

ADVANCED SECURITY LEVEL

3. Modif

nd choose

(ESSID) and

hange ESSID Broadcast to DISABLE

Choose WPA/WPA2 to Allowed Client Type.

Authentication = Pre-shared Key

Pre-shared key type = Passphrase (8~63 characters)

e-shared Key = < Type password here >

Note! Type Pre-shared Key about 8 - 63 characters long

e 12 for future use

ontrol.

Choose Yes to Enable MAC Filtering. Choose Allow to

will

(Wireless LAN card MAC can be

/ALL command)

Note! Check MAC addresses from Wireless LAN adapter

etwork will work right when

WPA/WPA2 encryption

reless network settings. You can find instructions from pages 15 - 16.

y wireless network settings.

Go to WIRELESS menu a

Channel/SSID/Security.

Change new name to wireless network

write it down to page 12.

Note! Network name can not contain any special

characters or spaces.

Change below settings to WPA/WPA2 menu.

Press Save Settings bottom-edge of page.

password. Write your password to pag

with your computer.

In WIRELESS menu choose Access C

Access Rule for registered MAC addresses. Enter w

LAN card MAC addresses from all computers which

ess point.

reless

access to this acc

found ex. in Win2000/XP with IPCONFIG

When you have added all MAC addresses, press Sa

Settings bottom-edge of page.

on Wireless Network Connection.

You can remove network cable now. Wireless n

password is entered to computer wi