User Guide

REPAIRING
1. Connect your computer to RoadRunner 24AP(i+) with net
twork cable (
work cable.
RJ-45).
. Log in to modem web management.
Open Internet browser and type address http://10.0.0.2
It is recommended to modify wireless network settings with ne
13
2
(If you can not access to address http://10.0.0.2
default password is password.
, check
computer network settings and browser proxy settings.)
. Modify wireless network settings.
rity.
Change new name to wireless network (ESSID) and
write down it to page 12.
Default Key ID = 1
e>
age.
aracters long en
344556677889900aabbcc. Write your encryption key to page 12
will work right when WEP encryption key is entered
k settings. You can find instructions from pages 15 -16.
BASIC SECURITY LEVEL
3
Go to WIRELESS menu and choose
Channel/SSID/Secu
Note! Network name can not contain any special
characters or spaces.
Choose WEP to Allowed Client Type.
Change below settings to WEP menu.
WEP Mode = 128-bit
Key Entry Method = Hex
Key Provisioning = Static
Key 1 = <Type ecryption key her
Press Save Settings bottom-edge of p
Note! You should enter your own 26 ch
numbers 0-9 and letters a-f, example 11223
for future use with your computer.
cryption key to Key 1 field which can contain
You can remove network cable now. Wireless network
computer wireless networto