User`s manual

Bluetooth USB Adapter User’s Manual
46
6.7 H ARDWARE S ETTINGS
The Hardware tab of the Bluetooth Configuration Panel provides basic information about
the Bluetooth hardware installed on this computer and access to the Advanced Settings
dialog box, if required:
• Devices:
 Name
: the name of the device, e.g., WIDCOMM Bluetooth Device
 Type
: the type of device, e.g., USB.
• Device Properties:
 Device status
: indicates that the device is operating properly or that there is a
problem/conflict.
 Manufacturer
: the name of the company that manufactured the device
selected in the Devices section of this dialog box.
 Firmware Revision
: the manufacturer's firmware version number.
 Device Address
: the Bluetooth Device Address (BDA or BD_Addr) assigned
to this device when it was manufactured.
 HCI Version
: the version number of the Bluetooth Specification that the Host
Controller Interface complies with.
 HCI Revision
: the revision number of the Bluetooth Specification that the
Host Controller Interface complies with.
 LMP Version
: the version number of the Bluetooth Specification that the
Link Manager Protocol complies with.

LMP Sub Version: the sub-version number of the Bluetooth Specification
that the Link Manager Protocol complies with.
• The Advanced button: displays the Advanced Settings dialog box, which allows
you to select the country code and transmission power settings. This option is not
available on all systems.