Full Product Manual

Page 10
D
C
E F D
C
E F
A
B
CAUTION
NOTE:
Total of 2 red support brackets. Remove red
support bracket before use! It is a packing material,
will damage engine without removing it.
Failure to remove the support brackets, can result in
damage to your generator, possible personal injury
and avoid your warranty.
Removal of Shipping Support Brackets
Before you can run your new generator, follow
these simple instructions:
The following items must be removed before running
your new generator. In order to protect your genera-
tor these items have been added to ensure safe
delivery of your new generator.
Your generator is now ready for use. Refer to your
owner's manual for proper oil fill and startup
Instructions.
Refer to the following instructions and pictures to
remove the attached engine support brackets
(red)(D) under the engine.
1. Before filling the engine oil, tip the generator back
onto its recoil frame end as indicated in this
picture. Place the generator on the flattened
cardboard box or other protective surface.
2. Remove the bolt (E) with double open wrench
(8mm-10mm) (B).
3. Remove the bolt (F) and nut (C) with double open
wrench (13mm-15mm) (A) and double open
wrench (8mm-10mm) (B).
4. You may discard these brackets, as it is no longer
required for normal operation of your generator.