Users Manual

7
1. Before first use, charge your
butterfly vibe for approximately
1.5 hours. The USB charging cable
can be plugged into any USB
port or USB/AC power adapter
(not included).
• Flashing Light = Charging
• Solid Light = Fully Charged
• Rapid Flashing Light = Low
battery, charge is needed
2. Wash your butterfly vibe with
soap and water, or toy cleaner
suitable for use with silicone
items.
FAQs can be found at
www.TheRabbitCompany.com
Email us at
[e-mail]
for any unanswered questions
3. Lubricate your butterfly vibe
(if needed) with a water based,
silicone compatible lubricant.
4. Turn ON your butterfly vibe
by pressing quickly. The
light will flash, indicating
the power is on and in
standby mode.
Push again on your butterfly
vibe to use the manual mode,
or push on the remote to pair
the remote & butterfly vibe.
Once in use, the light will
change from flashing to solid.
GETTING STARTED
TOY CLEANER
LUBE
BU T T E RF L Y
COL LE CTI ON