User's Manual

7
1. Before first use, charge your
rabbit for approximately 2 hours.
The USB charging cable can
be plugged into any USB port
or USB/AC power adapter (not
included).
• Flashing Light = Charging
• Solid Light = Fully Charged
• Rapid Flashing Light = Low
battery, charge is needed
2. Wash your rabbit with soap
and water, or toy cleaner suitable
for use with silicone items.
FAQs can be found at
www.TheRabbitCompany.com
Email us at
[e-mail]
for any unanswered questions
3. Lubricate your rabbit (if
needed) with a water based,
silicone compatible lubricant.
4. Turn ON your rabbit by
pressing
A
quickly at the
bottom of your rabbit. The
light will flash, indicating
the power is on and in
standby mode.
Push
A
again on your rabbit to
use the manual mode, or push
A on the remote to pair the
remote & rabbit.
Once in use, the base light will
change from flashing to solid.
GETTING STARTED
TOY CLEANER
LUBE