User's Guide

6 7
CHANGING YOUR
REMOTE CONTROL
BATTERY
1. Slide open the remote
control battery
compartment as shown.
2. Button cell CR 2032 has
been preinstalled into the
remote control.
3. Remove the paper
slip inside the battery
compartment to activate
the power in the remote
control.
4. Store the remote control
and the battery separately
to prolong the battery life.
WARNING
Do not expose this product to fire or water.
Disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that
can result in an explosion.
Leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure
that may result in an explosion or the leakage of
flammable liquid or gas.
Do not attempt to disassemble the product yourself.
Please contact after-sales service if there is an issue.
The battery used in this product is a non-chargeable
battery. Do not try to charge it.
This product contains small parts such as battery,
battery cover. The small parts are not toys, do not
allow children to play with them to prevent the risk
of suffocation.
Risk of safety issue if the battery is replaced by
an incorrect type.
Replacement of a battery with an incorrect type
that can defeat a safeguard.
Dispose of used batteries according to
instructions.
Do not ingest battery. Chemical Burn Hazard!
This product contains a coin/ button battery. If
the coin/ button cell is swallowed, it can cause
severe internal burns in just 2 hours and can
lead to death.
Keep new and used batteries away from
children.
If the battery compartment does not close
securely, stop using the product and keep it
away from children.
SPECIFICATIONS
Model Vibrating Jewel
Plug S / M
Vibrating Jewel
Plug M / L
Material Body Safe Silicone
Height 98 mm 106 mm
Diameter 37 mm 40 mm
Weight 68 g 85 g
Battery 200 mAh 350 mAh
Charging Time 90 mins 120 mins
Usage Time 90 mins 90 mins
Interface
Single Button & Manual Control
4 Button Remote Control