User's Manual

8 9
5. To change the vibration mode/
pattern and intensity via the base
control, press the
A. There are a
total of 15 modes when using
manual control. Vibration intensity
can only be increased via use of
the remote control.
6. To change the vibration intensity
and/or the mode/pattern via the
remote control, press and release
A
(Increase Intensity) and A (Decrease
Intensity). Press and release
A
to
change the vibration mode/pattern.
1. To turn the item ON quickly press
A
The
A
will flash to indicate the power
is on. Push again to change the vibration
pattern. There are a total of 15 modes
using the manual control. Vibration
intensity can only be increased via use of
the remote control.
2. To power OFF your anal beads press
and hold
A for 2 seconds. LED will turn
off to indicate the power is OFF.
MANUAL CONTROL
1
2