User's Manual

7
GETTING STARTED
1. Before first use, charge your
anal beads for approximately 2
hours. The USB charging cable
can be plugged into any USB port
or USB/AC power adapter (not
included)
• Flashing Light = Charging
• Solid Light = Fully charged
• Rapid Flashing Light = Low
battery. Charge is needed
2. Wash your anal beads with
soap and water or toy cleaner
suitable for use with silicone
items.
FAQs can be found at
www.bvibe.com
Email us at
[e-mail]
for any unanswered questions
3. Lubricate your anal beads
with a water based, silicone
compatible lubricant.
4. Turn ON your anal beads by
pressing quickly at the
bottom of your anal beads.
The light will flash, indicating
the power is on and in standby
mode.
Push again to use the
manual mode, or push
on the remote to pair
the remote & anal beads.
Once in use, the base light will
change from flashing to solid.
TOY CLEANER
LUBE