Radio Wireless Wheel Mouse User’s Guide MODEL: RFW-29 Trademark Recognition Windows, Office 97 and MS-IntelliMouse are registered trademarks of Microsoft Corp.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
Introduction Congratulations on your purchase! Your new RF-Mouse is easy to install and offers you a host of useful features. The Radio receiver can be conveniently placed to give you the freedom you need while working. The vertical wheel allows you to scroll, or zoom in and out in a document. You can program the mouse buttons to launch the NetJump or LuckyJump for a quick start to programs you run frequently.
Inserting the Batteries The RF-Mouse uses two AAA batteries. For best performance, use only alkaline batteries. Refer to the following to insert the batteries: 1. Press the tab on the bottom of the mouse cover as shown here and remove the cover. 2. Insert the two AAA batteries. (The correct polarity is indicated on the battery compartment casing.) 3. Replace the cover. Checking the Batteries power To check the battery power, right-click the mouse icon in the Taskbar.
4. Click Exit to close the RF-Mouse ID code window. Identifying Components The mouse is designed to fit snugly into your hand. The scroll wheel is positioned on the top allowing for easy operation with the index finger. Standard mouse buttons are positioned to either side of the scroll wheels and can be reached comfortably with the index and ring fingers. A third button is placed under the vertical wheel and can be easily clicked by pushing down on the wheel.
IWHEELWORKS DOES THE HEAVY WORK! With iWheelWorks driver/software installed, your Mouse is transformed into much more than just a pointing device. See how easy scrolling through long documents or panning in drawing applications becomes when using the scroll wheels. Office users should love this feature— use the vertical wheel to scroll through your document then just press the [Ctrl] key and use the same wheel to zoom in for a close look.
MOUSE PROPERTIES SETTINGS From the Mouse Properties window you can customize many settings for your mouse including button assignments, scroll wheels and cursor movement. To open the Mouse Properties window double-click on the mouse icon in the system tray. The Mouse Properties window has six tabs that are described below. Buttons Tab Button Assignments: Click the down arrow to select the preferred function for each button. (See the Settings Tab for more information.
Wheel Tab Wheel Mode: Select the Enhanced Dual Wheel 4D Wheel function mode radio button to enable both vertical and horizontal wheels. When the MS-IntelliMouse Compatible mode radio button is selected only the vertical wheel will function. Swap Vertical and Horizontal Wheel: Check this box to swap the functions of the Horizontal and Vertical Wheels. Vertical Wheel/Horizontal Wheel: Check the Reverse scrolling direction box to change the scrolling direction when you turn the scroll wheel.
THE USER-DEFINED COMMAND MENU Along with the LuckyJump and NetJump menus you can also create Command Menus to suit your specific work habits. You may want to create a specific command menu for a particular application and then assign it each time you work in that application. Creating a Command Menu Follow these instructions to create a new Command Menu: icon in the system tray. In the Mouse Properties window select the Settings 1. Double-click the mouse tab. 2.
Command Type Description Application/ Document This field lets you add your favorite programs to run or open a document or file that you specify. Enter the path or browse to the application/document that you want to open. File Folder This field opens the folder you specify in Windows Explorer. Enter the path or browse to the folder you want to open. Home Page The Home Page command takes you to the URL address you specify. Enter the URL address of the Web site you want to visit.
Adding a Keyboard Sequence Shortcut Command In Office applications many users are accustomed to using keyboard commands such as the copy command, [Ctrl] + [C] or the paste command [Ctrl] + [V] directly from the keyboard. However, to spare you from having to remember all these keyboard shortcuts you can add them to your Test Command Menu. Refer to the following to add a Keyboard Sequence command. 1. Double-click the mouse icon in the system tray. In the Mouse Properties window select the Settings tab. 2.
Volume Control Choose Volume Control from the LuckyJump grid. The volume control screen appears. Click on the slide bars or use the scroll wheels to set the balance and level for each control. This is a convenient way to adjust the volume no matter what application you are working in. E-mail Choose E-mail from the LuckyJump grid. Microsoft Outlook Express opens ready for you to send or receive e-mail.
