User's Manual

Inserting the Batteries
The RF-Mouse uses two AAA
batteries. For best performance,
use only alkaline batteries. Refer
to the following to insert the
batteries:
1. Press the up cover and
move to backward of the
mouse up cover as shown
here and remove the cover.
2. Insert the two AAA
batteries. (The correct
polarity is indicated on the
battery compartment
casing.)
3. Replace the cover.
Checking the Batteries power
To check the battery power, right-click the mouse
icon in the Taskbar. Choose the “Check RF-
Mouse Status” option to display the RF-Mouse
Status window. The current battery percentage
charge is shown.
Installing the Mouse Software
Before you can take advantage of the many features your mouse offers, you must install the driver.
The driver is on the installation diskette that came packaged with your mouse.
Windows 95/98/Me/2000/NT4.0 installation
1. Connect the mouse to your computer.
2. Insert the installation diskette into your floppy disk drive.
3. Click the Start button and then click Run.
4. In the Run dialog window, type A:\setup, where “A” is the letter of your floppy disk drive.
5. Click OK and follow the instructions on your screen to complete the installation.