User's Manual

R7 PowerSaver Wireless Optical Mouse
- 8 -
Wireless optical mouse : Respond frequency channel and ID
code
from Receiver
Press and release (1 second) the connect button on the bottom of
mouse, the RED PWR LED light turns “Off” and starts “Blinking with right
frequency channel and ID code . (shown as right image)
When the mouse is inactive, If the GREENPWR LED light of USB RF
Mouse Receiver is black out, it indicates that the right frequency channels
and ID codes are launched successfully between the receiver and the
mouse, otherwise, repeat the procedures of the right frequency channel
and ID codes. You are now ready to use the mouse.
Note：The connect button has two functions. One function is correspond
frequency with USB receiver. Other function is power switch. you can
control power on-off through it (please operate as “
Power
Management” show )
1. Frequency Button
2. Power on/off