BatteryFREE Office 2Wheel Wireless Optical Mouse User’s Manual Model：NB-99D www.a4tech.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TOTHE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
Introduction Congratulations on your purchase. Your new BatteryFREE Wireless Optical Mouse will offer you wireless freedom, yet no battery is required. Whilst saving you the cost of batteries, it assures wrist comfort, light, easy operation and no- RF interference. Same time, just one click on “2X Button” straightly opens files and programs easily. Save times and improve efficiency.
SETTING UP YOUR MOUSE PAD AND MOUSE 1. Plug the Mouse Pad’s USB plug to your computer’s USB port. 2. PWR LED on the Mouse Pad will be flashing in “RED” 3. Put the MOUSE onto the center of the MOUSE PAD. 4. PWR LED on the Mouse Pad will stop flashing become steady “RED” 5. Press the button “TUNE” to obtain the frequency for best performance. Do not move the mouse while the RUN LED is flashing in “GREEN” 6. You may move the mouse around once the RUN LED stopped flashing in “GREEN” 7.
STEP ONE: HOW TO INSTALL 2X-WHEEL (For Windows Me / 2000 / 2003 / XP / X64 ) 1. MUST: Please uninstall any previous mouse driver before installing the 2X-Wheel 2. MUST: Make sure you have completely finished setting up your mouse pad and mouse 3. Insert the included Compact Disc (CD) into your CD-ROM 4. Click “Install Driver” 5. Select model: BatteryFREE 2X Two Wheel NB-90D 6. Click the button on the right to install driver 7. Follow the on screen instruction to complete your installation 8.
STEP TWO: HOW TO PROGRAM YOUR MOUSE SETTINGS 1. Button is the first tab appears in your mouse properties 2. The mouse image that appears in the first section “Button Assignments” is a key to numbers listed to the right. 3. For example, # 1 button has been assigned as “Main Button” by default and it’s not programmable. 4. # 2 button has been assigned as “Right Button” which works as right click for your mouse 5. # 3 button has been assigned as “Pan” function by default.
STEP THREE: LEARN HOW TO SET THE 2ND WHEEL There are 2 ways to set 2nd Wheel 1. Click the 6th “2X-WheelJump” button located on your physical Mouse Body. A ring shape icon with four square shape ones built-in will pop up for you to set four different functions for the 2nd wheel (figure on the right).
There are 4 selections in the 2X-Wheel menus for 2nd wheel. You may choose up to 1 selection at a time. For example if has been selected, then the wheel will work as horizontal scrolling. Zoom In / Out function Backward / Forward the page Previous / Next Document TECH SUPPORT For tech support, please visit our website at http://support.a4tech.com/ or email us at support@a4tech.
SECIFICATION Wireless Battery Free Optical Mouse Manufacturer: A-FOUR TECH CO., LTD. Use of the equipment: For PC’s Mouse Equipment category: Wireless Battery Free Optical Mouse Mode of operation: Simmplex Frequency / Frequency range: 121 ~ 128KHz Maximum transmitter output power: 2.5 mW Number of channels and channel separation: Scan frequency to lock a working point for Wireless Battery Free Mouse . Working frequency of Every Mouse maybe be different , working point from 121 KHz to 128KHz.
