BatteryFREE 2X Quick Wireless Optical Mouse User’s Manual Model：NB-50D www.a4tech.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TOTHE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
INTRODUCTION Congratulations on your purchase. Your new BatteryFREE 2X Click Wireless Optical Mouse will offer you wireless freedom, yet no battery is required. Whilst saving you the cost of batteries, it assures wrist comfort, light, easy operation and no-RF interference. As the Same time, Just one click on “2X Button” straightly open files and programs easily. Save times and improve efficiency.
SETTING UP YOUR MOUSE PAD AND MOUSE IS JUST A SECOND AWAY: 1. Plug the Mouse Pad’s USB plug to your computer’s Run-Green LED USB port. 2. PWR LED on the Mouse Pad will be flashing in “RED” Power-Red LED Tune Button 3. Put the MOUSE onto the center of the MOUSE PAD. 4. PWR LED on the Mouse Pad will stop flashing become steady “RED” 5. Press the button “TUNE” to obtain the frequency for best performance. Do not move the mouse while the RUN LED is flashing in “GREEN” 6.
NOTE: 1. Do not use this product on any metal table or surface. The metal surface may interfere with the cross induction and have an adverse effect on the mouse operation. 2. Keep working temperature under 0 to 50 degree Celsius (0°– 50°C). 3. Frequency: 121 KHz-128 KHz 4. Keep your credit cards and ATM cards away from RFID Mouse Pad to prevent the card’s magnetic stripe from losing its efficiency. 5. Our RFID Mouse Pad will not erase any data in the memory stick.
Product specification brief Mouse Model name: NB-50D Microprocessor: SN8P2602AP Operating voltage: 3.
