User Manual Model: G7-750 www.a4tech.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
Hardware Installation 1. Pull out the Nano-receiver from the bottom of mouse. 2. Plug Nano-receiver into USB port of your computer or notebook. 3. Insert the supplied batteries, make sure that the positive (+) and negative (-) ends of the batteries match the polarity indicators inside the batteries housing. Then the power will be automatically on. After wireless setup has completed, the mouse is ready to use. Power Management of the Mouse 1.
A. Illustration of the main menu 1. Click “8 in 1”, from the “task pull-down” menu of each arrow direction, you can select “keyboard, mouse, office sets, key combinations, multimedia and internet” 6 main function categories and there are more than 30 different functions that are ready for your immediate selection. Task Pull-down Menu 2. Click “Customizable Button”, the 4th and 5th button can be programmed to different functions. B.
C. How to Indicate Battery Status All of G7 series have Battery Status Indicator in the software, click “ ”in the main menu of the software, then the battery power status will be displayed on the screen. It is convenient that you can easily be aware when the battery power is low and change battery in time. Smart Mouse Battery Low Warning Tick “Low Battery Inform”, when the mouse power is low, Figure. A will pop up in the right corner of your screen to remind you to replace the battery right away.
E. DPI Setting There are 4 DPI levels are provided to satisfy your needs for works and games. Step 2: Choose the desired DPI from below popped in the taskbar Step 1: Right click on the icon window. and select “DPI Set” How to use 8 in 1 After launching 8 in 1, click on “ Preset Functions ”, then you will see a list of different functions.
a. Start: Press the “Gesture Button” b. Track of the drawing line: Draw the lines as the arrow direction. c. End: Release the “Gesture Button” Reminder: If step b is omitted, it will perform as “Gesture Button" default function. d. Then the picture has been zoomed in accordance to the magnitude of the line length. 4. See the contrast after drawing the line.
devices which don’t pass safety standard. 3. Avoid using the wireless mouse on a metal surface. Metals such as iron, aluminum, or copper shield the radio frequency transmission and slow down the mouse’s response time or cause the mouse to fail temporarily. The radio frequency is 2.4GHZ, it is safe for our bodies, but please be cautious in using cardiac pacemaker or other body auxiliary instruments. Troubleshooting If the mouse is not working: 1. Make sure the mouse is on. 2.
