G6 Saver Wireless Optical Mouse User’s Guide Model: G6-74 www.a4tech.
Knowing the mouse 2.4GHz wireless technology with 16 channels and 1,048,576 ID codes Errorless 2-way communication technology The 2.4GHz RF wireless technology is fine-tuned with 16 selected channels Errorless 2-way communication technology features error and exclusive 1,048,576 ID codes; it offers precise and reliable wireless correction capability that speeds up data transmission and operation in the busy wireless environments. It allows many wireless increases wireless precision.
Hardware Installation Step 1: Inserting the Batteries A. Press the tab on the battery cover B. Insert the supplied batteries, making sure that the locates on the mouse as shown here positive (+) and negative (-) ends of the battery match and removes the cover. the polarity indicators inside the battery housing. C. Slide the batter cover back into its position until it “clicks” firmly into place. Step 2: Connect the Receiver For notebook computer: A.
E. If you can’t find or see your cursor on the screen, follow the steps below: 1. Unplug and re-plug the receiver 2. Test the device on another USB port or computer. 3. Some surfaces may “trick” the optical sensor, such as reflective surfaces like glass or mirrors. The optical sensor should perform well on all other surfaces. Power Management of the Mouse 1. To power on the mouse, press the connect button on the bottom of the mouse once. Power on/off (Connect button) 2.
Any electrical device, such as the computer monitor, Zip drives, speakers, etc., can cause interference with the wireless mouse. Most likely, this will affect tracking speed or the working range of the device. To make sure that your wireless mouse transmits and receives properly, refer to the following instructions: 1. For optimal performance, place the receiver at least 8 inches (20 centimeters) away from any other electrical devices, such as the computer monitor, Zip drives, speakers…etc.
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
System Requirements： To use the wireless mouse, your computer must meet the following hardware requirements and run one of the operating system listed below. Hardware Operating System □ IBM or Compatible PC □ Windows 2000, XP, MCE2005, XP (x64), 2003(x64), and □ Hard Disk Driver VISTA □ USB Port Tech Support For tech support, please visit our website at http://support.a4tech.com/ or email us at support@a4tech.
