User's Manual

- 6 -
Installing 2X-Office Software
Note: The driver is applicable to Windows 2000, XP, MCE2005, XP (x64), 2003(x64) and VISTA x86.
A. Before installing the 2X-Office, uninstall any previous mouse driver.
B. Insert the enclosed 2X-Office driver (CD) to start installation. Then you’ll see a “Figure C”
pop up (shown as the below figure). >>Click “Install driver” of the 2X-Office software to
install the driver.
C. The mouse icon “ ” will appear on the bottom right of your taskbar ( ), then
you have successfully installed the 2X-Office driver. OR,
Go to START, and then select PROGRAMS. If you see “A4 TECH Hardware”
>>“Mouse” >>”2X-Office” in the program list, then you have successfully installed the driver.
(Otherwise, installation is failed and you have to remove the driver and re-install).
Figure. C
To remove the driver, follow the steps below:
Go to START, then select PROGRAMS>> “A4 TECH Hardware” >>“Mouse” >>”Uninstall 2X-Office”.
How to Setup the 2X-Office Software
Step 1: Launching the software can be done with 2 methods:
A: Double Click on icon in the right corner of your desktop
OR Go to START >> PROGRAM >> A4 TECH Hardware >> Mouse >>
2X-Office, as shown below.
B: Now, you can program the mouse button on the mouse
properties.