2.4G RF Mouse Model:G10-770HL , G10-770H G10-770FL , G10-770F User Manual Multi-mode Software www.a4tech.
About "Multi-mode" software You can define the function of each mouse button in 5 modes, such as Screen capture, TutorPen, LaserPointer, 16-in-One, etc. Define 5 modes 1.
2. Select the function you preferred for each button from the pull-down function list. 3. Give a note for each button at the "Description of Reminder" fields. at the system tray and select “Function/Key Reminder” to set up the Reminder 4. Click indication: The function information will show at the system tray when pressing the mouse button. 5. Store and apply the setting by clicking "Apply".
How to shift / apply 5 modes 1. Easily shift 5 modes by pressing the “Mode-shift Button” and the Mode/Profile info will pop up shortly (as below figure). 2. Start to perform the chosen functions at your desired mode. Capture screen How to set: Select "Screen Capture" from the function list of the button . Usage: 1) Press/hold the mouse button a box around your object.
Use the wireless mouse for your presentation 1. TutorPen Press/hold the defined button to draw a line to remark the objects on your screen. You can eliminate the lines by double or triple click on the defined button. You may set the line width in the "TutorPen Setting". 2. LaserPointer Press/hold the defined button to highlight the objects on your screen.
4. Memo Click the the “Memo” to open Memo screen as below shows, then all the current button settings will be listed out as the reminder.Then, you can check each button setting and activate them immediately. Connect New Mice/KBs The multi-link receiver can link to 5 sets Mice/KBs for specified applications, such as presentation, meeting or teaching. Please follow the steps to finish the ID pairing of the new mice/KBs. 1) Click the icon " " at the system tray and select "10-Link Meeting Technology".
Gesture 16-in-1 Select “Gesture 16-in-1” from the pull-down function list, the setup box will pop up. Setup Box You may set up 16 user-friendly functions/commands to the defined gesture button or , including the functions of Keyboard/Mouse simulation, Open a file, Office, Text, Multimedia, Internet, etc. Usage: Press/hold the gesture button or perform the preset functions/commands.
as “Zoom In” by default, just press/hold the Gesture button or and Example: Using draw a line as shown below, and then release the button, the picture or the document will be zoomed in immediately. a. Press/hold the gesture button b. Draw the line as the or arrow direction c. Release gesture button or Then the picture has been zoomed in.
Adjust wireless range Click the icon at the system tray and select "Wireless Meeting Range Settings". Change the Mouse Wheel to 4-way Wheel Click the icon at the system tray and select "4-way Wheel".
1) The 4-way Wheel splits the working screen into 2 areas A and B as shown on the right. When the cursor locates in area A, the wheel will perform vertical scrolling; when the cursor locates in area B, the wheel will perform horizontal scrolling 2) You may move the Red split icon to change the ratio of area A and B. (Note: If the "Normal Wheel" is selected, the wheel will perform as a normal mouse wheel, and “4-way Wheel” function won't be launched.) Power-saving Management 1.
2. Click "Battery Indicator" to see the battery power status. 3. Low battery informs will pop up at the right corner of your screen when battery low.
Keyboard/Mouse Simulation: You may setup mouse button to simulate a keyboard’s keystroke or a key combination with “Win”, “Ctrl”, “Shift” and “Alt”. Also you may setup mouse button to be one of “mouse left button, mouse right button, wheel up and wheel down”. Key Combination: Quickly execute hotkey commands, such as: Cut, Copy, Paste, Delete, Search, Select All, Redo, Undo, New File, Open File, Save File, Print, etc.
Additional tasks of Screen Capture Tool Click the icon shown below: at your system tray, the full task list of Screen Capture Tool will pop up as Auto Launch on Boot If this task is selected, Screen capture tool will auto-execute when the system boots up. Mouse-Control Panel Open "Mouse Properties" of your Windows system, e.g., you may setup mouse pointers and other often-used mouse settings.
Notice: To ensure a good wireless connection, please read below instructions for your reference: 1. Avoid channel confliction from auto channel hopping 1） Click the icon at the system tray and select "RF Channel Setting". 2） Select "Channel-lock" to define a private channel to secure better wireless connection quality. 2. Avoid interference from iron panel of PC Click the icon at the system tray and select "Best Wireless Signal Monitoring".
If the wireless mouse is not working smoothly due to wireless conflicts, try below methods to get improvement. A) Please plug the Multi-link receiver into of B) to avoid shielding wireless signal instead . Use USB extension cable to position the Multi-link receiver at a distance to prevent electromagnetism interference from devices.
Troubleshooting & FAQ If the mouse is not working: 1. Make sure the mouse power is on 2. Try another USB port 3. Ensure the Multi-link receiver is inserted 4. Check battery and battery installation Product Support Need more technical support? Please go to: http://support.a4tech.com/ and our support team will respond within 72 hours. **Features and specifications of all A4TECH products are subject to change without notification. FCC: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
