Bluetooth Mouse User Guide Model: BT-630 www.a4tech.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
Package Contents 1. 2. 3. 4. Bluetooth Mouse 1*AA Battery Quick Set Up Guide CD (CD User Manual) Features 1. 2. 3. 4. Bluetooth V2.
Turn On/Off Mouse 1. Slide on the power switch to immediately turn on the mouse. 2. To turn off the mouse, just slide off the power switch and then LED light is off immediately. Battery Installation Open battery cover and insert the supplied AA battery. Please make sure that the positive (+) and negative (-) ends of the battery match the polarity indicators inside the battery compartment. Power Saving Management Four stages power saving mode provide the best power saving management.
Bluetooth Device Not Inserted Bluetooth Device Already Inserted Bluetooth Device In Working Bluetooth Software Vendor Bluetooth Software Name Microsoft Windows Bluetooth Windows XP(SP2) Above Broadcom Widcomm V4.0 Above IVT BlueSoleil V5.0 Above Toshiba Bluetooth Stack V3.0 Above Apple Mac OS X Bluetooth Mac OS X 10.4~10.5 Above Support Version Note：Before start Bluetooth Mouse connectivity, please check whether your system has already installed Bluetooth software and whether it works.
Step 3 ： Turn on the mouse and press the connection button at the bottom of mouse until the LED Indicator in the middle wheel blinks alternately in Red and Green. In the Add Bluetooth Device Wizard, select the My device is set up and ready to be found check box, and then click Next. Step 4：After the device names appear,click Bluetooth Mouse, and then click Next. Step 5：When the wizard asks to specify a passkey, click Don't use a passkey, and then click Next.
Bluetooth Software: WIDCOMM Step 1：Right click on Bluetooth icon located at system tray, then select Add a Bluetooth Device. Step 2：In popped Initial Bluetooth Configuration Wizard, Click Next. Step 3 ： Turn on the mouse and press the connection button at the bottom of mouse until the LED Indicator in the middle wheel blinks alternately in Red and Green. In Bluetooth Devices Selection, it will automatically detects discoverable bluetooth devices.
Bluetooth Software: BLUESOLEIL Step 1：Right click on Bluetooth icon located at system tray, then select Add a Display Classic View. Step 2：Double click orange circle button to start searching Bluetooth devices. Step 3 ： Turn on the mouse and press the connection button at the bottom of mouse until the LED Indicator in the middle wheel blinks alternately in Red and Green. The mouse icon will display after searching Bluetooth devices sucessfully.
Step 5：The Bluetooth mouse will automatically complete the connection. The bluetooth mouse has successfully installed while the LED Indicator in the middle wheel stops blinking.
Bluetooth Software: Bluetooth Stack Step 1：Right click on Bluetooth icon located at system tray, then select Add New Connection. Step 3 ： Turn on the mouse and press the connection button at the bottom of mouse until the LED Indicator in the middle wheel blinks alternately in Red and Green. In Add New Connection Wizard, click Express Mode, and then click Next to search Bluetooth devices. Step 5：Please wait while the wizard completes the process of adding your Bluetooth mouse.
Bluetooth Software: Mac OS X Bluetooth Step 1：Right click on Bluetooth icon located at system tray, then select Set up Bluetooth Device. Step 2：Follow on-screen instructions to continue setup. Select Mouse when below window appears. Step 3 ： Turn on the mouse and press the connection button at the bottom of mouse until the LED Indicator in the middle wheel blinks alternately in Red and Green. After device names appear, click BlueTooth Mouse, and then click Next.
Software Installation 1. Before installing the mouse software, please uninstall any previously installed mouse software. 2. Insert enclosed CD to start installation. 3. Follow on-screen instructions to complete the installation. 4. The icon will appear on your desktop, then you have successfully installed the software. 5. To launch the software, double click the icon on your desktop or go to Start—Programs—A4tech 8 in Right, then the icon will appear in the taskbar at the right corner of your screen. .
