Installation Guide

29
17
10A
11A
INSERT
INSERT THE WALL JAMB ONTO THE FRAME / INSÉRER LE JAMBAGE SUR LE CADRE
TOP VIEW
VUE DE DESSUS
VISTA SUPERIOR
SIDE VIEW
VUE LATÉRALE
24
INTERIOR
SHOWER SIDE
INTÉRIEUR
DE LA DOUCHE
4
7
6
4
2
13
4.3 Install the aluminum (#2) and
xed panel (#7) to the wall jamb
(#1), insert the seal (#6) between
the wall jamb and glass.
4.4 Secure the stopper (#29) by
screw driver.
4.5 Slide the xed panel clip (#24)
in the bottom track of the rail (#4).
Secure the clip (#24) onto the
xed panel by allen key.
4.3 Installer l'aluminium (#2) et le
panneau xe (#7) au montant
mural (#1), insérer le joint (#6)
entre le montant mural et la vitre.
4.4 Fixez le bouchon (#29) à l'aide
d'un tournevis.
4.5 Glissez le clip de panneau xe
(#24) dans le rail inférieur du rail
(#4). Fixez le clip (#24) sur le
panneau xe à l'aide d'une clé
Allen.
4.3 Instale el aluminio (#2) y el
panel jo (#7) en el jamba de
pared (#1), insierte el sello (#6)
entre el marco de la pared y el
vidrio.
4.4 Fije el bloque de tapón (#29)
con un destornillador.
4.5 Deslice el clip del panel de
retención (#24) en el carril inferior
del guía (#4). Sujete el clip (#24) al
panel jo con una llave allen.
LADO INTERIOR
DE LA DUCHA
VISTA LATERAL
INTERIOR
SHOWER SIDE
INTÉRIEUR
DE LA DOUCHE
LADO INTERIOR
DE LA DUCHA
OUTSIDE
EXTÉRIEUR
EXTERIOR
INSIDE
INTÉRIEUR
INTERIOR
Make the glass towards to the outside
part while install it and leave a little
space to insert seal.
Placez le verre vers l'extérieur lors de
l'installation et laissez un peu d'espace
pour insérer le joint.
Arrastre el vidrio sobre las partes
externas durante la instalación y deje un
poco de espacio para insertar el sello.