Product specifications

Page 48 AD-4329A Weighing Indicator
12.1.6. Commands to Set Parameters
Set Preset Tare
The preset tare value is set. The decimal point is not necessary because of according
to display.
Templete PT, [ value ]
Command
Reply
Set Upper Limit Value
Set the upper limit value of the upper/lower limit comparison. The decimal point is not
necessary because of according to display.
Templete HI, [ value ]
Command
Reply
Set Lower Limit Value
Set the lower limit value of the upper/lower limit comparison. The decimal point is not
necessary because of according to display.
Templete LO, [ value ]
Command
Reply
Set Final Value
Set the final value of the setpoint comparison. The decimal point is not necessary
because of according to display.
Templete S0, [ value ]
Command
Reply
Set Free Fall Value
Set the free fall value of the setpoint comparison. The decimal point is not necessary
because of according to display.
Templete S1, [ value ]
Command
Reply
Set Preliminary Value
Set the preliminary value of the setpoint comparison. The decimal point is not
necessary because of according to display.
Templete S2, [ value ]
Command
Reply
12. RS-232C Interface