Product specifications

Page 40 AD-4329A Weighing Indicator
9.3.3. Setting the Parameters of Setpoint Comparison
Step 1 Press the Operate/Standby key to turn the display off.
Step 2 Press and hold the PRINT key and press the
Operate/Standby key to display . 5et 0 for two seconds.
Step 3 Set the "Final" using the following keys.
key....... The key to select a figure.
key....... The key to select a number.
+/- key...... The key to select plus or minus.
key....... The key to store the parameter and
proceed to next step.
MODE key .. The key not to change the parameter
and proceed to next step.
Step 4 5et 1 is displayed for two seconds.
Set the "Free fall" using the same keys as step3.
Step 5 5et 2 is displayed for two seconds.
Set the "Preliminary" using the same keys as step3.
Step 6 5et 3 is displayed for two seconds.
Set the "Zero band" using the same keys as step3.
Step 7 Turn the display off using the
Operate/Standby key.
9.3. Setpoint Comparison