Product specifications

Page 38 AD-4329A Weighing Indicator
9.2.3. Setting Upper/Lower Limit Values
Step 1 Press the Operate/Standby key to turn the display off.
Step 2 Press and hold the PRINT key and press the
Operate/Standby key to display . Hi for two seconds.
Step 3 Set the upper limit value (HI) using the following keys.
key....... The key to select a figure.
key....... The key to select a number.
+/- key...... The key to select plus or minus.
key....... The key to store the parameter and
proceed to step 4.
MODE key . The key not to change the parameter
and proceed to step 4.
Step 4 lo is displayed for two seconds.
Set the lower limit value (LO) using the same keys as step 3.
Step 5 Turn the dsiplay off using the Operate/Standby key.
9.2.4. Example
F-function: f-20 1 (Upper/lower limit comparison),
f-21 2 (Data exceeding +5d)
Upper linit value: 5000
Lower linit value: 1000
Result Condition Formula Range HI (Over)
OK (GO) LO (Under)
5000 < Display value ~
5001
ON OFF
1000 Display value
5000
5000
~
1000
ON
5 < Display value < 1000
999
~
6
ON
Display value 5
5
~ OFF
9.2. Upper/Lower Limit Comparison