Product specifications

Page 32 AD-4329A Weighing Indicator
6.3. CF-Functions
Item Parameter Description
0
None Example: 12345
* 1 First figure Example: 1234.5
2
Second figure Example: 123.45
Cf-00
Decimal point position
3
Third figure Example: 12.345
* 0 kg
1
t
2
lb
Cf-01
Weighing unit
3
lb/kg alternately
* 0 2% of CAP, Tare limit is 100 % CAP
1
10% of CAP, Tare limit is 100 % CAP
2
3% of CAP, Tare limit is 50 % CAP
Cf-02
Zero range
Turning display on, the
range to zero display.
3
4% of CAP, Tare limit is 50 % CAP
* 0 No limitation
Cf-03
Zero track width, motion
detection condition
1
Use limitation at f-01 0, 1, 6, 7 and f-02 6, 7 only.
0
Gross when displaying gross.
1
Gross
Cf-04
Zero tracking
* 2 Gross or Net when displaying net.
* 0 Not to zero when turning display on.
Cf-05
Power-on zero
1
To zero when turning display on.
* 0 To permit preset tare.
Cf-06
To inhibit preset tare
1
To inhibit preset tare. (Ineffective preset tare key)
* 0 According to f-30, f-40.
Cf-07
Data output of tare
1
Using preset tare value and output net, a tare value is
output on manual mode or auto print mode (In Cf-09 2,
a tare value is output at all mode except command).
* 0
Not to output data at unstable value or over load.
It is effective in key mode.
Cf-08
Output on over load and
unstable state.
1
To output data always.
* 0
1
Cf-09
Header 2
2
* 0 Two figures . (dot)
1
Three figures . (dot)
2
Two figures , (comma)
Cf-10
Figure number of unit
for format 1 and
decimal point
3
Three figures , (comma)
Format 1 on standard
serial data output and
RS-232C interface.
Decimal point is effective
at format 1 and 2.
* 0 Not used (Ineffective)
Cf-11
Accumulation function
1
Use (Effective)
CAP : maximum capacity
6. Functions
Gross Net Tare Preset tare
* 0
GS NT TR PT
1
GS NT TR PT
2
G~ N~ T~ PT