Instruction manual

English 8
Setting the Unit
1.
Confirm that the scale is
turned off, and press and
hold the switch.
 When the switch is
continuously pressed, "unit" and
"uPr" are alternately displayed.
≪♪Beep≫
2.
Release the switch
when "unit" is displayed.
 The display changes from "unit" to
display the unit that is currently set.
≪♪Beep≫
3.
Press the switch to
select the unit that you
want to set.
 The unit changes each time the
switch is pressed.
 Wait for 3 seconds after setting the
unit.
4.
Confirm that "End" is
displayed.
 The settings are saved.
 After three seconds of
non-operation, the scale confirms
the selected unit with two beeps,
displays “End ” and automatically
turns off.
≪♪Beep beep≫
k
g
lb
k
g