Instruction manual

English 12
Recalling the Memory Data
Note: This device stores the last 90 measurements in memory.
1. Press the button.
The average of all measurements and the number of data are displayed.
(If no data, “0” is displayed. Press the
or START button to turn the device off.)
2. Each time the button is pressed, the memory data is displayed as follows.
Average of all AM (morning) measurements taken between 4:00 and 9:59.
(In the example, 8 measurements. If no data, “--” is displayed.)
Average of all PM (evening) measurements taken between 18:00 and 1:59.
(In the example, 18 measurements. If no data, “--” is displayed.)
Most recent data (No.n, in the example, No.35)
Three seconds after the data number display, the measurement data is displayed
.
During the data display, the date and time are displayed alternately.
Last data (No.1)
Three seconds after the data number display, the measurement data is displayed.
3. After the last data is displayed, press the button to return the average
display of all measurements.
4. Press the
START button to turn the device off.
After one minute of non-operation, the device will turn off automatically.
Average o
f
all the dat
a
Most recen
t
dat
a
Average o
f
AM dat
a
A
verage systolic
A
verage diastolic
A
verage pulse
Average o
f
PM dat
a
Last dat
a
(Oldest
)
Systolic
Diastolic
Pulse
Number of all the data
Number of AM data
Number of PM data
Date Time