Instruction manual

English 7
Turn off
Press
Yea
r
Month
Day
Hou
r
Minute
Using the Monitor
2. Adjusting the Built-in Clock
Adjust the clock prior to use.
1. Press the SET button until the year starts blinking.
2. Select the year using the button.
Press the SET button to set the current year and move to month/day selection.
The date can be set anywhere between the years 2011 and 2059.
3. Select the month using the
button.
Press the SET button to set the current month and move to day selection.
4. Select the day using the button.
Press the SET button to set the current day and move to hour/minute
selection.
5. Select the hour using the
button.
Press the SET button to set the current hour and move to minute selection.
6. Select the minute using the button.
Press the SET button to turn the device off.
Holding down the button will change the value continuously.
Pressing the START button will turn the device off anytime.
Notes: After three minutes of non-operation, the device will turn
off automatically.
When the clock has not been set, the clock display
indicates dashes as shown to the right.