Instruction manual

English 9
Measurements
Note: The UB-542, once used, will provide an inflation appropriate to the user, based on the previous measurement.
1. Sit comfortably with the cuff at the same level as your heart
and relax.
2. Press the START button.
All of the display segments are displayed.
Zero (0) is displayed blinking briefly.
Then the display changes, as indicated in the figure at the
right, as measurement begins.
The cuff starts to inflate. It is normal for the cuff to feel very
tight.
Note: If you wish to stop inflation at any time, press the START
button again.
3. The measurement starts automatically when inflation starts,
and the
(heart mark) blinks.
4. When the measurement is complete, the systolic and diastolic
pressure readings and pulse rate are displayed.
During the data display, the date and time are displayed alternately.
The cuff exhausts the remaining air and completely deflates
automatically.
5. Press the START button again to turn the device off.
Remove the cuff.
Notes: The device is provided with an automatic power shut-off
function.
Allow at least three minutes between measurements on
the same person.
START
button
S
ystolic
pressure
Diastolic
pressure
WHO
classification
Pulse rate
I.H.B. s
y
mbol
Inflating
and
Measurement
in progress
Exhausts remaining
air automatically
Zero display
Starts inflation
A
ll of the
displa
y
segments
displayed