Instruction manual

English 9
Measurements
Note: The UB-511, once used, will provide an inflation appropriate to the user.
1. Sit comfortably with the cuff at the same level as your heart
and relax.
2. Press the
START button.
The average recorded blood pressures and data number are
displayed briefly.
Then the display changes as indicated in the figure on the
right as measurement begins.
The cuff starts to inflate. It is normal for the cuff to feel very
tight.
Note: If you wish to stop inflation at any time, press the
START button again.
3. The measurement starts automatically when pressurizing
starts, and the
(heart mark) blinks.
4. When measurement is complete, the systolic and diastolic
pressure readings and pulse rate are displayed.
The cuff exhausts the remaining air and completely deflates
automatically.
5. Press the
START button again to turn off the power.
Remove the cuff.
Note: The device is provided with an automatic power shut-off
function.
Allow at least three minutes between measurements on
the same person.
A
veraged
data
Data
number
Pressurizing
and
Measuremen
t
in progress
Exhausts remaining
air automatically
START
button
Systolic
pressure
Diastolic
pressure
WHO
Classification
Pulse rate
I.H.B indicator